15) Name Stitch
■ Indication Status of Operation Panel
■ Operation Order
1. Press name stitch key on condition that power is on.
( confirm the set stitch number )
Indication lamp of name stitch turns on.
pressing one time : display vertical stitch number on the
indication device ( Ex : E- )
pressing twice : display horizontal stitch number on the
indication device ( Ex : F- )
pressing three times : cancel name stitch
2. Press zigzag width key
Zigzag width is displayed on the indication device.
3. Step or the pedal forward.
Sew as much as the set stitch number and then stop.
(vertical stitch number)
4. Convert direction and step the pedal again.
Sew as much as the set stitch number and then stop.
(horizontal stitch number)
5. Repeat stage 3~4.
Stop when the sewing in completed.
6. Perform thread cutting by pedaling backward.
<Note>
Sewing is possible even on condition that vertical stitch number (E sewing) was set only.(thread trimming is possible)
Turning the lamp on by pressing AUTO key, the machine sews as much as the set stitch number upon you pedal once.
And when sewing is completed, it executed thread trimming automatically.
Power On Status
Sewing
Indication Device
Vertical
stitch number
Horizontal
stitch number
26
To Next Page
Loading...
