SunStar KM-2070P SERIES - Sewing Method of Left;Right L-Stitch

5) Sewing Method of Left/Right L-Stitch
■ Operation Panel Indication Status
Ex) Set up five stitches for left L-stitch and repeat two times.
■ Operation Order
[Note]
·Set up “Condense Adjusting Dial”of the body of sewing
machine to “0”. (It may be a little adjusted to the direction
of +/- according to sewing status)
·According to the sewing results, properly adjust “Sewing
Speed”and “Condenser Adjusting Dial”)
·L-stitch pattern sewing speed : max 3,000spm
Power On Start
Sewing
or
or
[Indication Device]
Pattern Number
L-Stitch
Mode change
Stitch number
repetition number
display
repetition number
1. Press Left Blind key.
The left blind display lamp turns on, its pattern number
and the number of stitches are displayed on the indication
device, then the zigzag-width is displayed.
2. Press PARA/SET key.
The zigzag-width blinks on the indication device. At this
time, press left blind key, and the pattern number and the
number of stitches are displayed.
3. Press Half-stitch key to change into L-stitch pattern mode
The left blind display lamp continues to blink to display that
it has been changed into L-stitch pattern mode.
4. Use +,- key to change the repeated number of L-stitch.
(Ex: 5 stitch)
5. Press N2 key.
The repeated number of L-stitch is displayed on the
indication device.
6. Use +,- key to change the repeated number of L-stitch.
Number of repetition : 2 times (Ex:”7=02”)
7. When the change is finished, press PARA/SET key.
The zigzag-width is displayed on the indication device.
8. Press the pedal to start to sew.
<Example of 5-Stitch for
Left L-Stitch and 2 times
repeated pattern>
Sewing
Direction
L-letter Sewing Type
5 Stitch
2 Time Repetition
12