SunStar KM-2070P SERIES - Default Chapter; Table of Contents

Contents
1. Internal Structure of Control Box 4
2. Connection of Power Voltage and Control Box Cable 5
1) Power Voltage and Power Code Connection 5
2) Cable Connection to Control Box 6
1) Initialization of Machine 33
2) Intertia Tuning 33
3) Hook Test Function 33
4) Machine Test Function 34
5) Parameter Changing Method and Classification 37
6) Exchanging the Fuse 40
4. Error Indications and Action Plan 32
1) Operation Panel and key Functions 7
2) Pattern Setting Method 8
3) Sewing Method of Left/Right Scallop 10
4) Sewing Method of Left/Right Blind 11
5) Sewing Method of Left/Right L-Stitch 12
6) ZigZag Width (Max. zigzag-width: 10mm) 13
7) Sewing Speed 14
8) Using Method of Start Condence 15
9) Using Method of End Condense 17
10) Setting of Base-Line 19
11) Left/Right Stop Location of Needle 21
12) Up/Down Stop of Needle 23
13) Basic Concept for Operation of Operation Panel 23
14) Reverse (mirror) Function 24
15) Name Stitch 26
16) Deciding Presser Foot Up/Down Location 28
17) Thread Trimming and Wiper Function 28
18) Auto Function 28
19) Half Stitch Operation 28
20) Using Reverse Feed Control Lever and Using Reverse Button(A Button) 29
21) Rom Pattern (Use Pattern) Input Method 30
22) Formatting 30
23) Method of Setting the Starting Point 31
3. Using Operation Panel and Sewing 7
6. Block Wiring Diagram 41
5. Others 33