55
Others
1) Initialization of Machine
1. Turn on the power with pressing needle Up/Down key,
presser foot up/down key and thread trimming/wiper key.
2. Indication device displays I n I t and after a moment,
width is displayed. Then, initialization is completed.
2) Inertia Tuning
1. Turn on the power with pressing +key and –key.
·Indication device displays t U n E
2. Stepping on the pedal, the machine automatically performs
inertia tuning.
·It performs driving and controlling 8 times by itself.
<Note> As the needle bar stops at optional location
after performs inertia tuning, turn the power on and off
3) Hook Test Function
※ It is the function to match hook timing.
1. Turn on the power with pressing N1 and N2.
Indication device is displayed as shown in the figure.
2. Match hook timing by turning pulley by hands.
3. Pressing PARA/SET key, the machine converts to sewing
available status.
To Next Page
Loading...
