1. Press name stitch key on condition that power is on.
Indication lamp of name stitch turns on and vertical stitch
number is displayed on the indication device.
2. Change the vertical stitch number by using -and - key.
( Ex : vertical 20 stitch (E-20) )
3. Press name stitch key again.
Horizontal stitch number(F) is displayed on the indication
device.
4. Change the horizontal stitch number by using + and -key.
( Ex : horizontal 30 stitch (F-30) )
5. Press width key.
Zigzag width is displayed on the indication lamp.
6. Sew by pedaling
Sew as much as the set stitch number and the stop.
(E : vertical stitch number)
7. Convert direction and step the pedal again.
Sew as much as the set stitch number and then stop.
(F : horizontal stitch number)
8. Repeat stage 6 ~ 7.
Stop when sewing is completed.
9. Perform thread trimming by pedaling backward.
<Note>
You can separately do E sewing (vertical stitch number setting). (see [Fig.3-5] a)
Automatic stop to the set stitch number is possible and thread trimming is possible.
Stop the needle at the four corner of b in [Fig.3-5] and sew the cloth by pedaling after rotating 90 . (vertical and horizontal
stitch number can set to maximum 99 stitch. )
Using AUTO key, the machine execute sewing as much as the set stitch number upon you pedal once and execute thread
trimming automatically.
■ Change of vertical stitch number(E) and horizontal stitch number
(F) of name stitch
- pattern number : 2 point pattern
- zigzag width : 6mm
Power On Status
Sewing
or
Indication Device
or
(Changed vertical
stitch number)
AUTO on -Automatic thread trimming
F
F
E
E
<Note> After changing vertical stitch number, upon
pedaling sewing is possible. ( sewing E vertical stitch
number)
(Changed horizontal
stitch number)
27
To Next Page
Loading...
