Ex) In case of right stop setting
Example of Needle Right Stop Setting
[ Fig. 3-2 ]
Pedal Neutral Location (Sewing Stop)
Stop
<2point pattern> <4point pattern> <right scallop >
Stop
Stop
<Note>
Unless set the left/right stop location of needle, it can stop anywhere.
In case of straight-line pattern and blind pattern, left/right stop location of needle is not reflected.
Setting left or right stop, though step the pedal to neutral or pedal while sewing, the sewing will continue to the designated
location.
In case of left stop, the machine moves to the maximum left stitch and in case of right stop, it moves to the right stitch.
In scallop, in case of right stop, the machine moves to the next right stitch and in case of left stop, it moves to the next left
stitch.
<Note>
When moving the needle to the needle up stop location, do not move by turning the half-stitch key or sewing machine pulley
by hands. Then, sewing start from left/right stop location of needle becomes invalid
< Sewing start location >
In case of right stop setting, start from the right and in case of left stop setting and start sewing from the left.
In case of needle down stop, exchange the sewing material by making the needle to move to needle up stop by pedaling
backward and start sewing. Then, it start at the very location.
In scallop, start sewing from the right in case of left scallop and in case of right scallop, it start from the left (the top of the
shape).
In case of no setting of left/right stop location of needle, sewing starts from the left in case of 2 point, 3 point and 4 point pattern.
22
To Next Page
Loading...
