SunStar SC 8200J Series User Manual

5
2) Trial Operation (pedal operation method) --------------------------------------------------- 28
3) Trial sewing (How to operate a clutch-type pedal) ---------------------------------------- 28
8. Thread Tension ------------------------------------------------------------------------------------- 29
1) Thread Tension Adjustment --------------------------------------------------------------------- 29
2) Adjustment of Presser Bar Pressure --------------------------------------------------------- 29
3) Adjusting the pneumatic presser bar --------------------------------------------------------- 30
9. Cleaning ------------------------------------------------------------------------------------------------ 31
1) Daily Cleaning -------------------------------------------------------------------------------------- 31
10. Adjustment ------------------------------------------------------------------------------------------ 32
1) Adjustment of Needle Bar Height -------------------------------------------------------------- 32
2) Adjustment of Needle and Looper Timing --------------------------------------------------- 33
3) Needle Avoiding Looper Timing --------------------------------------------------------------- 33
4) Adjustment of Needle Bar Guide -------------------------------------------------------------- 34
5) Adjustment of Feed Dog Height --------------------------------------------------------------- 34
6) Adjustment of Thread Release Lever -------------------------------------------------------- 35
7) Adjustment of Thread Take-up Guide -------------------------------------------------------- 35
8) Adjustment of Upper Thread Adjusting Cam ----------------------------------------------- 36
9) Adjustment of Thread Release Shaft --------------------------------------------------------- 36
10) Adjustment of Lower Thread Take-up Timing -------------------------------------------- 36
11) Lapper Installation ------------------------------------------------------------------------------- 36
12) Adjusting position of the belt puller ---------------------------------------------------------- 37
13) Fixing without puller ----------------------------------------------------------------------------- 38
14) Decelerator Timing Adjustment -------------------------------------------------------------- 39
15) Adjustment of Puller Feeding Amount -------------------------------------------------------40
16) Speed Lever Stitch Length Adjustment ---------------------------------------------------- 40
17) P.S.W-I Stitch Length Adjustment ---------------------------------------------------------- 40
18) Ascending Momentum of the Ruller --------------------------------------------------------- 41
19) Bearing Replacement---------------------------------------------------------------------------- 41
20) Breakdown of TENSION DISK & E-RING --------------------------------------------------41

SunStar SC 8200J Series Specifications

General

Brand	SunStar
Model	SC 8200J Series
Category	Sewing Machine
Language	English