SunStar SC 8200J Series - LRP Puller Attachment

15
①
②
6m/m TAP
64/9
INCH
TAP
③Parellel
④
⑥
⑤
6) LRP Puller Attachment
A. Replace the no. ① presser foot bolt with the
decelerator bolt.
B. Attach the no.
② lower roller to the machine.
* Refer to clause H.
C. Attach the no.
③ decelerator to the machine.
※ Adjust the no.
③ È upper/ lower roller horizontally.
D. Replace the pulley of the no.
④ machine with the
decelerator pulley.
E. Connect the no.
⑤ shaft lever with the no. ⑥ pulley
lever.