SunStar SJS/A-PS/A User Manual

22
6.8) Presser Foot Height Adjustment
1) Place the needle bar at the lowest position and loosen
the presser foot screw ⓐ.
2) Adjust the presser foot height to set the distance
between the presser foot bottom and the sewing fabric
at 0.5mm (the length of thread used) and fasten the
screw.
6.9) Waste Oil Handling
When the waste oil can located below the bed supporting
bracket is filled with waste oil, remove and empty the can.
ⓐ
0.5mm
Waste oil can

SunStar SJS/A-PS/A Specifications

General

Brand	SunStar
Model	SJS/A-PS/A
Category	Sewing Machine
Language	English