5
6.13) Mounting the Direct Motor and Adjsuting Method
.........................................
37
6.14) Oil Supply
...........................................................................................................
37
6.15) Cleaning
.............................................................................................................
40
6.16) Handling of Waste Oil
.......................................................................................
40
7. CAUSES OF BREAK-DOWN AND TROUBLESHOOTING
..........................
41
8. SPS/E-1306(1507)-GS-10
.......................................................................................
43
8.1) Machine Specifications
.......................................................................................
43
8.2) How to Thread the Upper Thread
.....................................................................
43
9. SPS/E-1306(1507)-HS(GS)-20(21, 22,22-1,23)
.................................................
44
9.1) Machine Specifications
.......................................................................................
44
9.2) Infusion of Pressured Air and Adjustment of Pneumatic Pressure
...............
45
9.3)
Attaching the Pressure Plate Sheet and Adjusting the Height of the Slider Base
.......
45
9.4)
How to Adjust the Up and Down Movement of the Upper Feed Plate
...........
46
9.5) How to Use the Pedal Switch
............................................................................
47
9.6) Air System Ciruit Diagrams
................................................................................
49
10. DRAWING OF TABLE
............................................................................................
53
10.1) SPS/E-1306(1507) Series
...............................................................................
53
11. PNEUMATIC HOOK-TYPE CLOTH FEED
........................................................
54
11.1) Mechanical specifications
.................................................................................
54
11.2) How to operate
..................................................................................................
54