7
1.2) SPECIFICATIONS OF THE MACHINE
Series type
Usage
Sewing Area
Sewing Speed
Stitch Length
Needle
Needle Bar Stroke
Hook
Press Plate Lift
Adjusting the lowest position of the presser foot
Presser Foot Stroke
Lifting Amount of Presser Foot
Lifting Amount of Feeding Frame
Feeding System
Emergency Stop Function
Pattern Select Function
Memory
Memory Backup
Graphic OP
2nd Origin Function
Maximum Speed Limit
# of input stitches
Zoom-out/in ratio
Safety Device
Main Motor
Power Consumption
Recommended Temperature
Recommended Humidity
Power
Air Pressure
SPS/E-1507HS- SPS/E-1507GS- SPS/E-1507ES-
For heavy materials For general materials Extra heavy materials
150mm×70mm
Max. 2,700 spm (Stitich Length : 30mm or less)
Max. 2,000 spm (Stitich Length : 30mm or less)
0.05 ~ 12.7mm (Min. limit of resolution: 0.05mm)
DP×17 #18 DP×5 #14 DP×17 #23
41.2mm
Double capacity Shuttle Hook
Max. 25mm(Specifications : Max. 30mm)
Standard 0~3.5mm ( Max. 0~7mm)
Standard 4mm [0~7mm]
Max. 20mm
Max. 25mm
Full Closed Pulse Motor-based Feed
Available During Sewing Operation
Pattern No. Can be Selected from No.1 to No.999
USB Flash Drive
The Working Point is Stored in the Memory when the machine stops Abnormally
Options
Another Origin Point Can be Set by Using Jog Key
The Maximum Speed can be Limited from 200 to 2,700 spm
Max. 360,000 Stitches
1~400%(1% Step)
Emergency Stop Function, Maximum Speed Limit Function
Direct drive-type 550W AC servo motor
Direct drive-type 750W AC servo motor
600VA
5。C ~ 40。C
20% ~ 80%
1Ø : 100~240V, 3Ø: 200~440V, 50/60Hz
0.49Mpa(5kgf/㎠)
To Next Page
Loading...
Need help?
General
