19
1. Do nothing - The welder will continue operation as normal even when the previous
(voltage, current, or power) were out of the min max range.
2. Flag and stop weld - The welder will stop welding and alert the user anytime the
(voltage, current, or power) goes out of the min max range that was set.
3. Flag and continue weld - The welder will continue welding but will alert the user
that the (voltage, current, or power) went out of the min max range that was set.
• Previous Weld - This box tells the user if the previous weld was within the set max and min
values.
To Next Page
Loading...
