Need help?Do you have a question about the SunTech CT40 and is the answer not in the manual?
General| Technology | Oscillometric |
|---|---|
| Connectivity | USB |
| Parameters Measured | Systolic BP, Diastolic BP |
| Power | AC adapter |
| Memory Capacity | 99 readings |
Defines the clinical grade, automated blood pressure measurement device with optional temperature and pulse oximetry modules.
Specifies the device's capability to measure and display blood pressure, heart rate, SpO2, and body temperature for specific patient groups.
Outlines the user's responsibility for proper assembly, operation, maintenance, and repair of the device.
Provides guidelines on using specific cuffs, monitoring patients, and understanding factors affecting measurement accuracy.
Specifies the use of approved SpO2 sensors and cables to ensure compatibility and prevent patient injury.
Lists critical safety warnings regarding IV lines, limb circulation, wounds, defibrillator protection, and flammables.
Illustrates common icons and symbols used on the device and in the manual for various functions and warnings.
Provides a list of common abbreviations used in the manual, such as BP, BPM, EMR, SYS, DIA, etc.
Instructions for checking all proper components upon unpacking the SunTech CT40 device.
Details the connections available on the rear panel of the SunTech CT40 device, including power and USB ports.
Explains how to attach side panels for temperature or SpO2 modules using a Phillips-head screwdriver.
Guidance on installing the rechargeable lithium-ion battery, including charging time and precautions.
Instructions for environmentally responsible disposal of the device's lithium-ion battery.
Steps for connecting power, BP cable, SpO2 sensor, temperature sensor, and other accessories.
Information on using the device on a tabletop or mounting it to a wall or mobile stand.
Details on configuring the device using the Advanced Configuration Application for network or EMR connectivity.
Explains the various elements and icons displayed on the SunTech CT40's measurement screen.
Describes how patient ID and time stamps are displayed and managed on the device.
Explains the memory icon and memory delete icon for managing saved measurements.
Details icons indicating Wi-Fi, AC power, printer, and barcode scanner connectivity.
Indicates a warning symbol that prompts the user to take immediate action for errors.
Describes the battery symbol and its segments indicating the device's remaining battery power.
Explains icons related to selecting measurement modes like Averaging and Auscultatory.
Defines the display of Diastolic (DIA) and Systolic (SYS) blood pressure values.
Illustrates icons indicating EMR connectivity status and successful data transmission.
Details how to switch between Adult and Pediatric BP measurement modes.
Explains how heart rate (BPM) and Mean Arterial Pressure (MAP) are displayed.
Describes the SpO2 display indicating arterial oxygen saturation percentage.
Details icons for temperature units, modes (Cold, Predictive, Direct), and measurement sites.
Describes the functions of the Memory, Toggle Mode, Selection Knob, Start/Stop, and Home buttons.
Guides through the initial power-up process, including setting the date and time.
Explains Initial Power-up, Nominal Power-up, Power-down, and Automatic Power-down modes.
Details the importance of documenting patient ID, including using a barcode scanner.
Instructions on connecting and using the optional SunTech thermal printer for measurement results.
Describes how to save measurements to the device memory or send them to an EMR system.
Covers patient positioning and selecting and positioning the appropriate BP cuff.
Explains how to switch between Adult and Pediatric measurement modes for different patient age groups.
Details the three BP measurement modes: Single, Averaged, and Auscultatory SphygMode.
Guides on setting the number of measurements to average and time intervals.
Instructions for setting up and using the Auscultatory SphygMode for manual BP verification.
Provides step-by-step instructions for performing BP measurements in Single, Averaging, and Auscultatory modes.
Explains how to record, print, or digitally save the blood pressure and heart rate measurements.
Details steps for clearing data and preparing the device for the next patient.
Describes how heart rate is captured automatically during BP measurement.
Explains measuring heart rate using the optional SpO2 sensor.
Explains how pulse oximeters use light absorption to measure arterial oxygen saturation (SpO2).
Lists factors that can cause inaccurate SpO2 readings, such as sensor application and patient condition.
Warns that pulse rate measurement is based on peripheral flow and may not detect certain arrhythmias.
Explains SpO2 calibration and how COHb/MetHb levels affect accuracy.
Describes the CT40 device, SpO2 modules (Masimo SET, ChipOx), and reusable probes.
Step-by-step instructions for correctly applying the SpO2 sensor and obtaining readings.
Notes on Masimo SET module, including patent information and sensor compatibility.
Provides detailed information on the Masimo SET MS board pulse oximeter principles and DST plot.
Presents a graphical plot of ARMS values for Masimo SET Oximetry accuracy.
Notes on ChipOx module, including sensor usage and compatibility verification.
Shows a graphical plot of ARMS values for ChipOx Oximetry accuracy.
Describes the FILAC 3000 module for oral, axillary, or rectal temperature readings and probe cover usage.
Instructions for performing oral temperature measurements using the thermometer probe.
Steps for conducting axillary temperature measurements under the arm.
Guidance for performing rectal temperature measurements with the thermometer probe.
Details various modes (Quick, Predictive, Direct, Cold) of the FILAC 3000 thermometer.
Instructions for using the optional touchless infrared temporal thermometer.
Explains how to save, recall, and manage measurements using the device's memory function.
Provides steps for clearing single or all measurements from the device memory.
Details on sending measurements to an EMR system, including validation and transmission processes.
Explains the process of scanning a patient's barcode ID to validate it with the EMR system.
Describes the procedure for sending measurements to an EMR, including troubleshooting error messages.
Instructions for cleaning the SunTech CT40 monitor using mild disinfectants.
Guidelines for cleaning and caring for SpO2 sensors and thermometer probes.
Covers system self-checks and inspection of replaceable parts like cuffs and hoses.
Advises on inspecting and replacing monitor parts like cuffs and hoses for damage.
Information on replacing the battery and the hazards associated with it.
Instructions for environmentally responsible disposal of the device's lithium-ion battery.
Guidance on disposing of the product according to WEEE directive.
Instructions for proper disposal of used blood pressure cuffs.
Recommends bi-annual checking of blood pressure function accuracy by a biomedical technician.
Lists part numbers and descriptions for main unit accessories like BP hoses and cuffs.
Details Masimo SET and ChipOx SpO2 modules, including reusable sensors and patient cables.
Lists Covidien FILAC 3000 and Touchless IR thermometer modules and related accessories.
Includes accessories like mobile stands, printer mounts, thermal printers, and barcode scanners.
Explains how error codes are displayed and provides actions for BP, Temperature, SpO2, and EMR status messages.
Lists specific status codes for Temperature, SpO2, EMR, CT40 System, Powering Device, and Barcode Scanner issues.
Specifies the normal measurement ranges for BP, Heart Rate, Temperature, and SpO2.
Details the battery life in measurement cycles and remaining power indicators.
Explains the automatic power-down feature after a period of inactivity.
Describes the meaning of various beeps, including long beeps for measurement completion and short beeps for errors.
Provides essential electromagnetic compatibility (EMC) information and precautions for installation and use.
Details compliance with emissions standards and guidance for the electromagnetic environment.
Outlines immunity test levels and guidance for the electromagnetic environment.
Specifies immunity requirements for voltage variations on power supply lines.
Details immunity requirements for power frequency magnetic fields.
Specifies immunity requirements for conducted radio frequency (RF) disturbances.
Provides immunity requirements and recommended separation distances for radiated RF fields.
Calculates recommended separation distances based on transmitter output power to prevent RF interference.
Lists general specifications including operating conditions, power, dimensions, standards, and classifications.
Details specifications for BP measurement, including measurement method, range, and accuracy.
Discusses factors that can affect blood pressure readings, such as patient condition and environmental factors.
Provides technical specifications for ChipOx and Masimo SET SpO2 sensors, including accuracy and saturation ranges.
Details specifications for Touchless IR and Covidien FILAC thermometers, including accuracy and response time.
Outlines the limited warranty provided by SunTech Medical, Inc. for the device and its components.
Provides a link to SunTech's current Conflict Minerals Statement.
To Next Page
