SUNWARD SWE210F - Work Mode Selection

106
3.4.3 Work mode selection
 Based on different work condition, select
different work mode for the high efficiency,
energy saving, and environmental friendly
purpose.
 You can select relevant mode by means of
pressing “MODE” on touch screen. The mode
“S” is the default work mode. Each touching
corresponds to a shifting operation following a
sequence as S→L→H→S
S─ medium load work mode.
L─ light load work mode
H─ heavy load work mode
It’s a complete shift cycle
.
 The applicable work conditions corresponding
to individual work mode are as follow:：
Work
mode
Applicable work condition
S
Applicable for operations with
small load and high economical
efficiency requirements.
L
Applicable for operations with
light load, e.g. operation on flat
work ground.
H
Applicable for operations with
heavy load and demanding for fast
operation speed.