SUNWARD SWE210F - DPD Regeneration Switch; DPD Regeneration Lamp; Engine Stop Switch

85
3.2.15 DPD Regeneration Switch
 . Regeneration switch is used to control
the engine into the manual regeneration
process
 Place regeneration switch on "ON"
position, the engine will enter into the
manual regeneration process when it
meets the requirement.
 The switch as the reset switch, when it
looses, it will automatically be reset to
"OFF"
3.2.16 DPD Regeneration Lamp
 Regeneration indicator lamp indicates
whether the engine into the ongoing
regeneration And what is the regeneration
process.
 Green indicator lamp is flash means
engine is automatically regeneration
process, it ends and lamp is go out.
 Yellow indicator lamp is flash means
engine needs to manual regeneration
process or at the manual regeneration
process, it ends and lamp is go out.
3.2.17 Engine Stop Switch
 Engine emergency parking switch is
used to stop engine at the emergency
status.