SUNWARD SWE210F - Working Lamp Switch; Wiper Switch; Washer Switch

84
3.2.12 Working lamp switch
 Working lamp switch is used to control
headlight, working light, and light for monitor.
 Set working lamp switch to ON position,
machine’s front light, working light, and
monitor light will be electrified and
illuminated.
 Set switch to OFF position, the power for front
light, work light, monitor light will be cut down.
Light will be shut down.
3.2.13 Wiper switch
 Wiper switch is used to control wiper located
on front window of the cab.
 Set the wiper switch to ON position to activate
wiper.
 Set the wiper switch to OFF position to stop the
wiper and reset to original state.
3.2.14 Washer switch
 Washer switch is used to control the washer for
cab front window.
 Set washer switch to ON position to activate
the washer.
 Set the switch to OFF position to stop the
washer.