What to do if SUNWARD SWE215F-5 Excavators display screen does not work?
If the display screen on your SUNWARD Excavators isn't working, the cause might be a blown fuse, a defective wire circuit, or a damaged display screen. Try replacing the fuse or check the circuit and repair.
Why does the starting motor continue to run on SUNWARD SWE215F-5 Excavators?
If the starting motor continues to run after your SUNWARD Excavators engine has started, it's likely due to a start relay that fails to disconnect or gets pulled in, or a defective starting key. Try replacing the starting relay.
Why all indicators do not work on SUNWARD Excavators?
If all indicators on your SUNWARD Excavators are not working, it could be due to a blown fuse, a defective wiring circuit, or a defective circuit board. You can try replacing the fuse or check the circuit and repair.
What causes turbocharger joint leakage in SUNWARD SWE215F-5?
Turbocharger joint leakage in SUNWARD Excavators can be caused by bearing or seal wear, damage, excessive pressure in the crankcase, or carbon clogging in the oil return piping of the turbocharger. You can check the intake pipe to ensure its function or check and clean up the oil return piping.
Why individual indicator does not work on SUNWARD SWE215F-5 Excavators?
If an individual indicator isn't working on your SUNWARD Excavators, it could be due to a damaged bulb, a blown fuse, or a defective wiring circuit. Try changing the bulb or change the fuse.
What causes abnormal fuel indication in SUNWARD SWE215F-5?
For abnormal fuel indication on your SUNWARD Excavators, the cause may be a defective oil level sensor, a defective wiring circuit, or a defective indicator. Try to check and repair, or replace the defective parts.
Understand and maintain safety labels in the machine for hazard identification.
Follow general safety precautions for machine operation and maintenance.
Guidelines for safe startup, operation, and parking procedures.
Precautions for safe maintenance, including warning signs and proper procedures.
Instructions for safe transport, including loading, unloading, and securing.
Procedures for preparing, maintaining, and retrieving the machine from storage.
Illustrated overview of machine components and their identification.
Detailed explanations of machine controls, switches, and monitor system.
Specific procedures for cab functions, accessories, and accumulator.
Setting up, adjusting, and performing various work and travel operations.
General guidelines, daily inspections, and preparation for maintenance tasks.
Details on oils, coolants, fuels, filters, and their specifications.
Torque values for fasteners and schedules for lubrication and fluid changes.
Scheduled maintenance tasks based on operating hours.
Identifying and resolving common engine, electrical, and hydraulic system issues.
Key technical data including weight, capacity, engine, and hydraulic system details.
Detailed measurements of the machine's size and components.
Performance specifications like digging height, depth, radius, and forces.
Diagrams of the electrical and hydraulic systems.
Information on machine noise levels and vibration characteristics.
Important safety considerations for attachments and general operation.
Contact details for distributors and service points.
List of international subsidiaries and their contact details.
General| Brand | SUNWARD |
|---|---|
| Model | SWE215F-5 |
| Category | Excavators |
| Language | English |
To Next Page
