Chapter 4: BIOS
4-21
Current TPM State
This item shows the current TPM State only.
Change TPM State
Select "Enabled & Activate" to enable TPM support for the system. Select De-activate
& Disabled to disable the function of TPM support. If "No Change" is selected, no
changes will be done to the current TPM State. Select Clear to clear or erase all
information related to TPM support.
If set to "Clear", the sub-menu: Physical Presence Operations will appear. Select
Reject to cancel the selection. Select Execute to proceed with selection. All information
re
lated to TPM Support will be erased.
4-6 Trusted Platform Module (TPM) State
(Available if the TPM Support Option is enabled in the Security Setting)
Choose the TPM State menu from the Phoenix BIOS Setup Utility with the arrow
keys. You should see the following display.
To Next Page
Loading...
Need help?
General
