Release : 1.1f 893 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.4 match
This command specifies the fields in the incoming packets that are to be examined for the
classification of the packets. The IP access group / MAC access group can be used as match
criteria.
match access-group { mac-access-list | ip-access-list } <acl-index-num
(1- 65535) >
Syntax Description
mac-access-list - Access list created based on MAC addresses for non-IP traffic
ip-access-list - Access list created based on IP addresses. The IP-access list can either be
defined as a standard IP-access list or an extended IP-access list.
acl-index-num - Specifies the ACL index range. The ACL index range for an IP standard ACL
is 1 to 1000 and IP extended ACL is 1001 to 65535. The ACL index range for a MAC extended
ACL is 1 to 65535.
Mode
Class Map Configuration Mode
Example
iss (config-cmap)# match access-group mac-access-list 5
Differentiated services must have been enabled in the device.
MAC access list and IP access list must have been configured.
Related Commands
class-map - Creates a class map to be used for matching the packets with the class whose
name/index is specified
show class-map - Displays QoS Class maps
To Next Page
Loading...
