Release : 1.1f 901 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.11 show class-map
This command displays quality of service (QoS) class maps, which defines the match criteria to
classify traffic.
show class-map [<class-map-num(1-65535)>]
Syntax Description
class-map-num - Displays the configured class map number
Mode
Privileged/User EXEC Mode
Example
SMIS# show class-map
DiffServ Configurations:
------------------------
Class map 20
--------------
Filter-ID : 3
Filter-Type : IP-Filter
Related Commands
class-map - Creates a class map that is meant to be used for matching the packets to the class
whose index is specified
match - Specifies the fields in the incoming packets that are to be examined for the classification
of the packets
To Next Page
Loading...
