Release : 1.1f 896 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.7 police
This command defines a policer for the classified traffic. This command also specifies the action
to be taken if the specified rate is exceeded or if there is no match for the policy configured.
police <rate-Kbps(64-1048572)> exceed-action {drop | policed-dscp-
transmit <new-dscp(0-63)>}
Syntax Description
rate-Kbps - Average traffic rate in kilo bits per second (Kbps)
exceed-action - Indicates the action of the switch when the specified rate is exceeded.
drop - drops the packet
policed-dscp-transmit -
changes the Differentiated Services Code Point (DSCP) of
the packet to that specified in the policed-DSCP map and then sends the packet
Mode
Policy-Map Class Configuration Mode
Example
iss (config-pmap-c)# police 128 exceed-action drop
Although the command-line help string displays a large range of values, the rate Kbps option
cannot exceed the configured port speed. If a larger value is entered, then the switch rejects the
policy map when attached to an interface.
Related Commands
class - Defines a traffic classification for the policy to act
policy-map - Used to enter the policy map configuration mode
class-map - Creates a class map used for matching packets
show policy-map - Displays the QoS policy maps
To Next Page
Loading...
