Release : 1.1f 967 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.6 lldp transmit-interval
This command configures the time interval on which LLDP update messages are sent.
The no form of this command resets the transmit interval to its default value 30 seconds.
lldp transmit-interval <seconds(5-32768)>
no lldp transmit-interval
Syntax Description
transmit-interval – any number between 5 to 32768
Mode
Global Configuration Mode
Defaults
30 seconds
Example
SMIS(config)# lldp transmit-interval 180
Related Commands
show lldp – Displays the LLDP feature information.
To Next Page
Loading...
