4-8
X10DRU-i+ Motherboard User’s Manual
Intel® Virtualization Technology (Available when supported by the CPU)
Select Enable to support Intel Virtualization Technology, which will allow one
platform to run multiple operating systems and applications in independent parti-
tions, creating multiple "virtual" systems in one physical computer. The options
are Enable and Disable.
Note: If a change is made to this setting, you will need to reboot the
system for the change to take effect. Refer to Intel’s website for detailed
information.
Advanced Power Management Conguration
This section is used to congure the following CPU Power Management settings.
Power Technology
Select Energy Efciency to support power-saving mode. Select Custom to custom-
ize system power settings. Select Disabled to disable power-saving settings. The
options are Disable, Energy Efciency, and Custom.
If the above is set to 'Custom' the following options are displayed:
CPU P State Control
EIST (P-States)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency to reduce power consumption and
heat dissipation. The options are Disable, and Enable.
Turbo Mode (Available when Intel® EIST Technology is enabled)
Select Enable to use the Turbo Mode to boost system performance. The options
are Enable and Disable.
P-State Coordination
This feature allows the user to change the P-State (Power-Performance State)
coordination type. P-State is also known as "SpeedStep" for Intel processors.
Select HW_ALL to change the P-State coordination type for all hardware com-
ponents only. Select SW_ALL to change the P-State coordination type for all
software installed in the system. Select SW_ANY to change the P-State coordina-
tion type for a particular software program specied by the user in the system.
The options are HW_All, SW_ALL, and SW_ANY.
To Next Page
Loading...
Need help?
General
