EasyManuals Logo

Supermicro SUPERO X10DRU-i+ User Manual

Supermicro SUPERO X10DRU-i+
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Chapter 1: Overview
1-5
X10DRU-i+ Jumpers
Jumper
Description Default Setting
JBT1 Reset BIOS Conguration See Chapter 2
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
X10DRU-i+ Connectors
Connectors Description
Battery (JBAT1) Onboard CMOS Battery (See Chpt. 3 for used battery disposal)
BP PWR1/2 Backplane power connector units 1/2 (each unit comprised of two 8-pin power
connectors) used for Backplane HDD devices (BP PWR1/2) (BP PWR1: for
CPU1 platform support, BP PWR2: for CPU2 platform support)
COM1 Backplane COM Port1
Fan1-8 CPU/system fan headers
GPU PWR1-PWR4 8-pin power connectors (1-4) for GPU devices
JF1 Front panel control header
JF2 4-pin power connector used for HDD devices
JL1 Chassis Intrusion header
JIPMB1 4-pin external BMC I
2
C header (for an IPMI card)
JSD1/JSD2 SATA DOM (Device on Module) devices w/power connections (SuperDOM
devices 1/2)
JTPM1 TPM (Trusted Platform Module)/Port 80 header
JUIDB2 UID (Unit Identication) button
IPMI_LAN IPMI_dedicated LAN support by the ASpeed controller
PSU1/PSU2 Power supply Unit 1/Unit 2 headers (PSU1: for CPU1 platform support, PSU2:
for CPU2 platform support)
I-SATA0~3, 4, 5 SATA 3.0 connectors supported by Intel PCH
S-SATA 0~3 SATA 3.0 connectors supported by Intel SCU (S-SATA 0-3)
SXB1A/1B/1C SMCI-proprietary PCI-E slot used for WIO-Left riser cards (supported by
CPU2)
SXB2 SMCI-proprietary PCI-E 3.0x8 slot for WIO-Right riser cards (supported by
CPU2)
SXB3A/3B/3C SMCI-proprietary PCI-E slot used for Ultra Riser devices (supported by CPU1)
Note: For additional LAN connections, please install an Ultra riser card on
this slot Also, refer to http://www.supermicro.com/support/resources/aoc/
aoc_compatibility_ultra.cfm for more info.
I-SGPIO2 Seria_link General Purpose I/O (GPIO) header (for S-SATA ports)
SP1 Internal speaker/buzzer
(BP) USB 0/1 (3.0) Backpanel USB 3.0 Ports 0/1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro SUPERO X10DRU-i+ and is the answer not in the manual?

Supermicro SUPERO X10DRU-i+ Specifications

General IconGeneral
BrandSupermicro
ModelSUPERO X10DRU-i+
CategoryMotherboard
LanguageEnglish

Related product manuals