Supermicro SuperServer E403-9P-FN2T - Page 108

SuperServer E403-9P-FN2T User's Manual
108
5.7 Boot
Boot Settings.
Boot Mode Select
Use this feature to select the type of device that the system is going to boot from. The options
are Legacy, UEFI, and Dual.
Legacy to EFI Support
This feature enables the system to boot to EFI OS if boot fails from Legacy boot order. The
options are Enabled or Disabled.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices that the system boots from. Press <Enter>
on each entry from top to bottom to select devices.
*If the feature "Boot Mode Select" above is set to Legacy, UEFI, or Dual, the following
items will be displayed:
• Legacy/UEFI/Dual Boot Option #1
• Legacy/UEFI/Dual Boot Option #2
• Legacy/UEFI/Dual Boot Option #3
• Legacy/UEFI/Dual Boot Option #4