14
SuperServer E403-9P-FN2T User's Manual
Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JPS1 SAS 3.0 Enable/Disable Pins 1-2 (Enabled)
JPSAS1 SAS HDD Enable/Disable Pins 1-2 (Enabled)
JPTG1 LAN Enable/Disable Pins 1-2 (Enabled)
JWD1 Watchdog Timer Pins 1-2 (Reset)
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1 – FAN7 System Fan Headers
IPMI_LAN Dedicated BMC LAN Port
I-SATA0–7 Intel PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SGPIO1, I-SGPIO2,
S-SGPIO1
Serial Link General Purpose I/O Headers
JD1 Speaker/Power LED Indicator (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNVI
2
C1 NVMe I
2
C Header
JOH1 Overheat LED Header
JPI
2
C1 Power System Management Bus (SMB) I
2
C Header
JPWR1 8-pin 12V DC Power Connector for CPU (Required)
JPWR2 24-pin ATX Power Connector
JPWR3 4-pin 12V Power Connector for GPU Card (Requires an extra 12V power at up to 75W)
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
JUIDB1
LAN1, LAN2 10GbE LAN Ports
L-SAS0~3 Four SAS 3.0 Ports (with RAID 0, 1, 10) (X11SPW-CTF only)
M.2 M.2 PCIe 3.0 x4 or SATA 3.0 Slot
MH10, MH11 M.2 Mounting Holes
SP1 Internal Speaker/Buzzer
S-SATA0~1 SATA 3.0 Ports with SATA DOM Power
SXB1A, SXB1B, SXB1C Supermicro Proprietary WIO Left Add-on Card Slots
SXB2 Supermicro Proprietary WIO Right Add-on Card Slot
To Next Page
Loading...
