Supermicro SuperServer E403-9P-FN2T - Wall Mount Procedure

SuperServer E403-9P-FN2T User's Manual
44
Figure 2-14. Installing the Mounting Brackets
Wall Mount Procedure
The CSE-403iF can be mounted directly on a surface using the mounting brackets and
mounting screws or nails. The following procedure describes how to mount the system to a
sturdy surface. Note that formal testing has only been performed on dry wall. Use screws or
󰀩
Mounting the Chassis
1. Attach the three mounting brackets to the chassis using the ten M4xL4 screws that

is pre-attached.