EasyManua.ls Logo

Supermicro SuperServer E403-9P-FN2T - Page 134

Supermicro SuperServer E403-9P-FN2T
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134
SuperServer E403-9P-FN2T User's Manual
Appendix C
System Specications
Processors
Single Intel Xeon 81xx/61xx/51xx/41xx/31xx or Xeon 82xx/62xx/52xx/42xx/32xx processors (Intel Scalable Processors) with
up to 28 cores and a thermal design power (TDP) of up to 205W in Socket P0 (LGA3647) Note: Refer to the motherboard

Chipset
Intel C622
BIOS
256 Mb SPI AMI BIOS SM Flash UEFI BIOS
Memory
Six slots for up to 1.5TB DDR4 3DS ECC RDIMM or LRDIMM memory with speeds of up to 2933MHz
Storage Drives

(Optional) M.2: One PCIe M.2 M-Key
PCI Expansion Slots
One PCIe 3.0 x16 slot and two PCIe 3.0 x8 slots, OR two PCIe 3.0 x16 slots
One M.2 M-Key 2280/22110 (PCIe 3.0 x4 / SATA3).
Motherboard
X11SPW-TF; Length 13", width 8" (330 mm x 203 mm)
Chassis
E403iF (WxHxD) 10.5 x 4.3 x 16 in. (267 x 109 x 406 mm)
System Cooling

Input/Output
Two 10 GbE ports
One dedicated IPMI port
USB: four 3.0 ports; two USB 2.0 ports
One serial port; one VGA port
Two SuperDOM (Disk on Module) ports with built-in power
Weight
Net Weight: 18 lbs (8.16 kg)
Gross Weight: 24 lbs (10.89 kg)
Power Supply
Model: PWS-601-1H, 600 W AC multi-output power supply with PFC, 80Plus gold level
Input: 100-240 Vac; 7.5-3.1 A; 50-60 Hz
Operating Environment
Operating Temperature: 0º to 45º C (32º to 113º F)
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Table of Contents

Related product manuals