Supermicro SuperServer E403-9P-FN2T - Page 72

SuperServer E403-9P-FN2T User's Manual
72
CPU Conguration
The following CPU information will display:
• Processor BSP Revision
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache RAM
• Processor 0 Version
Hyper-Threading (ALL) (Available when supported by the CPU)
Select Enable to support Intel Hyper-threading Technology to enhance CPU performance.
The options are Disable and Enable.
Cores Enabled
Set a numeric value to enable the number of cores. (Please refer to the Intel website for more
information.) Enter 0 to enable all cores.
Monitor/Mwait
Select Enabled to enable the Monitor/Mwait instructions. The Monitor instructions monitors a
region of memory for writes, and Mwait instructions instruct the CPU to stop until the monitored
region begins to write. The options are Auto, Disable, and Enable.
Execute Disable Bit (Available if supported by the OS & the CPU)
Select Enable to enable the Execute-Disable Bit, which will allow the processor to designate
areas in the system memory where an application code can execute and where it cannot,
       
or damage the system during an attack. The options are Disable and Enable. (Refer to the
Intel
®
and Microsoft
®
websites for more information.)