Supermicro SuperServer E403-9P-FN2T - Page 78

SuperServer E403-9P-FN2T User's Manual
78
Enforce POR
Select POR (Plan of Record) to enforce POR restrictions on DDR4 frequency and volt-
age programming. The options are POR and Disable.
PPR Type
Use this feature to set the Post Package Repair type. The options are Auto, Hard PPR,
Soft PPR, and PPR Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1866, 2000, 2133, 2400, 2666, and 2933.
Data Scrambling for DDR4
Use this feature to enable or disable data scrambling for DDR4 memory. The options
are Auto, Disable, and Enable.
tCCD_L Relaxation
Select Enable to get TCDD settings from SPD (Serial Presence Detect) and implement
into memory RC code to improve system reliability. Select Disable for TCCD to follow
Intel POR. The options are Disable and Auto.
2X REFRESH
Use this feature to select the memory controller refresh rate to 2x refresh mode. The
options are Auto and Enable.
Page Policy
Use this feature to set the page policy for onboard memory support. The options are
Closed, Adaptive, and Auto.
IMC Interleaving
-
troller), which will improve memory performance. The options are 1-way Interleave, 2way
Interleave, and Auto.
Memory Topology
This feature displays DIMM population information.
Memory RAS Conguration