Supermicro X11DPG-QT User Manual

Super X11DPG-QT User's Manual
86
bank group of a DDR4 DRAM device, while hard Post Package Repair (hPPR) will take
a longer time to provide permanent repair on a raw element. The options are Auto, Hard
PPR, Soft PPR, and PPR Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1866, 2000, 2133, 2400, 2666, and 2933. (Note: 2933 MHz mem-
ory is supported by 2nd Gen Intel Xeon Scalable-SP (82xx/62xx series) processors only.)
Data Scrambling for NVMDIMM
Select Enable to enable data scrambling to enhance system performance and data in-
tegrity. The options are Auto, Disable, and Enable.
Data Scrambling for DDR4
Use this feature to enable data scrambling for DDR4. The options are Auto, Disable,
and Enable.
Enable ADR
Select Enable for ADR (Automatic Diagnostic Repository) support to enhance memory
performance. The options are Disable and Enable.
Refresh Options
Use this feature to select the self refresh mode. The options are Accelerated Self Refresh
and 2x Refresh.
Memory Topology
The following information will be displayed: P1 DIMMA1/P1 DIMMB1/P1 DIMMC1/P1
DIMMD1/P1 DIMME1/P1 DIMMF1
Memory RAS (Reliability_Availability_Serviceability) Conguration
Memory RAS Conguration Setup
Use this submenu to congure the following Memory RAS settings.
Static Virtual Lockstep Mode
Select Enable to support the static virtual lockstep mode. The options are Disable
and Enable.
Mirror Mode
Use this feature to select the mirror mode. The options are Disable, Mirror Mode 1LM,
and Mirror Mode 2LM. If this feature is set to Mirror Mode 1LM or Mirror Mode 2LM,
the available memory capacity will be reduced by 50 percent.

Supermicro X11DPG-QT Specifications

General

PS/2 ports quantity	0
IPMI LAN (RJ-45) port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Number of SATA III connectors	10
Number of DIMM slots	16
Maximum LRDIMM memory	2000 GB
Supported RDIMM module capacity	64GB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Supported memory clock speeds	2133, 2400, 2666 MHz
BIOS type	AMI
ACPI version	4.0
BIOS memory size	64 Mbit
RAID levels	0, 1, 5, 10
Wi-Fi	No
LAN controller	Intel® X550
Ethernet interface type	10 Gigabit Ethernet
On-board graphics card model	Aspeed AST2500
Bundled software	Intel Node Manager, IPMI2.0, KVM LAN, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Supported QPI	10.4 GT/s
Processor socket	LGA 3647 (Socket P)
Processor manufacturer	Intel
Processor number of cores supported	28
Component for	Server
Motherboard chipset	Intel® C621
Audio output channels	7.1 channels
PCI Express x16 (Gen 3.x) slots	6

Weight and Dimensions

Depth	335.3 mm
Width	384 mm