Supermicro X11DPG-QT User Manual

Chapter 4: UEFI BIOS
87
UEFI ARM Mirror
Select Enable to support the UEFI-based address range mirroring with setup option.
The options are Disable and Enable.
Memory Rank Sparing
Select Enable to enable memory-sparing support for memory ranks to improve memory
performance. The options are Disable and Enable.
*If the feature, Memory Rank Sparing, is set to Enable, the following features
will become available for user's conguration:
Multi Rank Sparing
Use this feature to set the multiple rank sparing number. The default setting and the
maximum is two ranks per channel. The options are One Rank and Two Rank.
Correctable Error Threshold
Use this feature to enter the threshold value for correctable memory errors. The default
setting is 10.
SDDC Plus One
Single Device Data Correction (SDDC) allows data to be reconstructed when one of
the memory devices fails on a DIMM. Use this feature to enable the SDDC support.
The options are Disable and Enable.
ADDDC Sparing
Adaptive Double Device Data Correction (ADDDC) Sparing detects the predetermined
threshold for correctable errors, copying the contents of the failing DIMM to spare
memory. The failing DIMM or memory rank will then be disabled. The options are Dis-
able and Enable.
Patrol Scrub
Patrol Scrubbing is a process that allows the CPU to correct correctable memory errors
detected on a memory module and send the correction to the requestor (the original
source). When this feature is set to Enable, read-and-write will be performed every
16K cycles per cache line if there is no delay caused by internal processing. The op-
tions are Disable and Enable.
Patrol Scrub Interval
This feature allows you to decide how many hours the system should wait before the
next complete patrol scrub is performed. Use the keyboard to enter a value from 0-24.
The Default setting is 24.

Supermicro X11DPG-QT Specifications

General

PS/2 ports quantity	0
IPMI LAN (RJ-45) port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Number of SATA III connectors	10
Number of DIMM slots	16
Maximum LRDIMM memory	2000 GB
Supported RDIMM module capacity	64GB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Supported memory clock speeds	2133, 2400, 2666 MHz
BIOS type	AMI
ACPI version	4.0
BIOS memory size	64 Mbit
RAID levels	0, 1, 5, 10
Wi-Fi	No
LAN controller	Intel® X550
Ethernet interface type	10 Gigabit Ethernet
On-board graphics card model	Aspeed AST2500
Bundled software	Intel Node Manager, IPMI2.0, KVM LAN, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Supported QPI	10.4 GT/s
Processor socket	LGA 3647 (Socket P)
Processor manufacturer	Intel
Processor number of cores supported	28
Component for	Server
Motherboard chipset	Intel® C621
Audio output channels	7.1 channels
PCI Express x16 (Gen 3.x) slots	6

Weight and Dimensions

Depth	335.3 mm
Width	384 mm