4-8
C7P67 User’s Manual
Chipset Confi guration
The items included in the Advanced Settings submenu are listed below.
CPU Bridge Confi guration
The following CPU Bridge submenu items are listed below.
CPU Revision:
• This item displays the CPU revision used in the system.
Current CPU1 Memory Frequency:
• This item displays the status of current
CPU1 memory frequency.
Memory Type:
• This item displays the memory type used in the system.
Memory Reference Code Revision:
• This item displays the revision number
of the memory reference code of the CPU used in the system.
Memory Frequency
Use this feature to force the system memory to run at a different frequency from
the frequency specifi ed by the memory module. The available options are Auto,
Force DDR-800, Force DDR-1066, Force DDR-1333 and Force DDR-1600.
North Bridge Confi guration
The following North Bridge submenu items are listed below.
North Bridge Revision:
• This item displays the revision number of the North
Bridge chip used in this system.
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O
VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI
Tables. This feature offers fully-protected I/O resource-sharing across the Intel
platforms, providing the user with greater reliability, security and availability in
networking and data-sharing. The settings are Enabled and Disabled.
Active State Power Management
This feature allows the user to set Active-State Power Management level for
signal transactions between L0 and L1 Links on the PCI Express Bus. Select
Force L0 to force all links to the L0 state to maximize power-saving and transac-
tion speed. Select Auto to allow the system BIOS to automatically confi gure the
setting for the system. The options are Auto, Force L0 and Disabled.