4-16
C7P67 User’s Manual
Pending TPM Operation
This feature is used to schedule a TPM operation that is pending. Select "Enable
Take Ownership" to allow the pending TPM operation to take precedence over other
operations in the queue and be processed and executed immediately. If the option
"Disable Take Ownership" is selected, the pending TPM operation will not take
precedence over other operations and will be processed based on the order that
are placed in the queue. Select the option "TPM Clear" to delete all pending TPM
operations from the queue. If the option "None" is displayed, there is no pending
TPM operation in the queue. Please note that a system reboot is needed for any
change on the feature to become effective. The options are None, Enable Take
Ownership, Disable Take Ownership, and TPM Clear.
Current TPM Status Information
This feature displays the current status of the TPM items listed below.
TPM Enabled Status
This item indicates if TPM support is enabled or not in this system.
TPM Active Status
This item indicates if TPM support is active or not in this system.
TPM Owner State
This feature lists the status of the TPM Owner.
Intel TXT (LT) Confi guration (Available when Secure Mode
Extension (SMX), Virtual Technology (VT) and VT-d are
enabled)
This feature allows the user to confi gure Intel Trusted Execution Technology Set-
tings. (Please refer to the sections: Processor & Clock and North Bridge in the
Advanced submenu for VT and VT_d confi guration.)
Secure Mode Extension (SMX)
This item indicates if SMX is enabled or not.
Intel TXT (LT) Support
This item indicates if Intel TXT (LT) is enabled or not.
To Next Page
Loading...
Need help?
General
