Chapter 3 Introduction
www.supmea.com
Chapter 3 Installation
3.1. Installation tips
Note!
Please check whether the boxes are damaged or not, and whether they
have been handled roughly or not. Please report the damage to the
deliverer and the manufacturer.
Note!
Please check the packing list to make sure the goods that you receive is
complete.
Note!
Please check the instrument nameplate, and confirm whether the
delivered contents are consistent with your order. Check whether the
power supply indicated on the nameplate is correct. If not
correct, please contact the manufacturer.
3.2. Storage
(1) The instrument shall be stored in a dry and clean place.
(2) Avoid exposure in direct sunlight for long.
(3) Instrument shall be stored in the original package.
3.3. Pipeline design
The following items shall be considered when the pipes are designed.
(1) Leave enough space on the side.
(2) Do not make the electromagnetic flowmeter subject to violent vibration.
3.4. Pipe design
(1) Location
1
The electromagnetic flowmeter shall be installed in a dry and ventilated
place. A place easy for water accumulation shall be avoided.
To Next Page
Loading...
Need help?
General
