EasyManua.ls Logo

SUPMEA SUP-LDG - Chapter 4 Electrical connection; 4.1. Safety tips; 4.2. Connect signal and magnetic field current cable

SUPMEA SUP-LDG
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Electrical connection
www.supmea.com
-25-
Chapter 4 Electrical connection
4.1. Safety tips
Danger!
Only when the power is switched off, can we do all the work about
electrical connections. Please pay all attention to the power supply on
the nameplate!
Danger!
Please observe national installation regulations
Warning!
Please strictly observe local occupational health and safety regulations.
Only those who have got properly trained are allowed to operate on the
electrical equipment.
Tips!
Please check the nameplate of the equipment, and confirm
whether the delivered contents are consistent with your order, and
check whether the voltage indicated on the nameplate is
correct. Otherwise, please contact manufacturer or supplier.
4.2. Connect signal and magnetic field current cable
Danger!
Only when the power is cut off can you connect signal and
magnetic field current conductor.
Danger!
The equipment must be grounded in accordance with regulations
so as to protect the operator from electrical shock.
Danger!
In case that equipment is used in explosion danger areas, special
notes are given to explosion-proof instructions for safety tips.

Table of Contents

Related product manuals