SUPMEA SUP-LDG - 6.6.6. System function, empty pipe function, sensor function, test function setup menu

Chapter 6 Operation
www.supmea.com
-
45
-
Option 1: 3.125Hz Option 2: 6.25Hz
10-9
Gain
selection
Option
Manufacturer
2001/3/9
X3
Gain selection: Adjustment of the gain can change the range of flow
speed.
Gain magnitude
:
1, 3, 9
11-Test parameters
11-0
Allow test
Option
Manufacturer
Y/N
N
Set to Y to make the test flow rate effective, and automatically return to N
after power off.
11-1
Flow rate
Option
Manufacturer
-99.999~99.9
99
1.000
To set the simulated flow rate, it will take effect after setting "11-0 Allowed
Test" to "Y".
11-2
Source code
Option
Manufacturer
Y/N
N
After set to Y, the original code of the signal will be displayed on the
running screen, and this screen will display the firmware version number
and product serial number at the same time