118
6-1. Phone operation (Hands-free system for cellular phones)
● This function may not be available
depending on the type of cellular
phone.
When a call is interrupted by a third
party while talking, the incoming
call screen is displayed.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
“Decline”: Select to refuse to receive
the call.
■ Changing parties
1 Select “Swap calls”.
Each time “Swap calls” is
selected during an interrupted
call, the party who is on hold will
be switched.
● This function may not be available
depending on the type of cellular
phone.
1 Display the phone top screen.
(P.108)
2 Select “Message”.
A confirmation message appears
when the “Automatic message
transfer” function is set to off
(P.130), select “Yes”.
3 Check that the message screen
is displayed.
“Phone”: Select to change to phone
mode.
The account name is displayed
on the left side of screen.
Account names are the names of
the accounts that exist on the
currently connected phone.
The following functions can be
Incoming call waiting
Bluetooth
®
phone mes-
sage function
Received messages can be for-
warded from the connected
Bluetooth
®
phone, enabling
checking and replying using
the system.
Depending on the type of
Bluetooth
®
phone connected,
received messages may not be
transferred to the system.
If the phone does not support
the message function, this
function cannot be used.
Displaying the message
screen
To Next Page
