Suzuki ACROSS - Connecting to Miracast Via Wi-Fi

37
2
2-2. Connectivity settings
Basic function
PIN code used when the
Bluetooth
®
device was regis-
tered. Can be changed to a
desired code. (P.37)
Device address is unique to the
device and cannot be changed.
Select to set the connection sta-
tus display of the phone on/off.
Select to set the connection sta-
tus display of the audio player
on/off.
Compatibility profile of the sys-
tem
Select to reset all setup items.
■ Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■ Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select
“OK”.
1 Press the “SETUP” button.
2 Select “Wi-Fi
*
”.
3 Select the items to be set.
*
:Wi-Fi
®
is a registered trademark of
Wi-Fi Alliance
®
.
B
C
D
E
F
G
Connecting to Miracast
®
via Wi-Fi
®
Using the Wi-Fi
®
function, this
system can connect to
Miracast
®
. But this function is
not for connecting to internet.
It’s only for connecting to
Miracast
®
.
Displaying the Wi-Fi
®
set-
tings screen