• Tighten the brake pedal bolt to the specified torque.
(!] Brake pedal
bolt:
29 N·m (2.9 kgf-m,
21.0
Ib-ft)
NOTE:
After installing the brake pedal, install the new cotter pins into
the brake pedal bolt
and
pin.
• Install the engine sprocket, with side ®
of
the sprocket facing
toward the engine.
• Tighten the engine sprocket nut to the specified torque.
(!]
Engi""
sprock"t
nut:
110
N·m (11.0 kgf-m. 79.5 Ib-ft)
NOTE:
When tightening the engine sprocket nut, depress the brake
pedal.
• Bend the washer securely.
•
Tighten
the
engine
oil
hose
union
bolt to
the
specified
torque
.
(!] Engine oil hose
union
bolt:
23
N·m (2.3 kgf-m, 16.5 Ib-ft)
ENGINE
3-9
http://www.motorcycle.in.th
To Next Page
Loading...
