Suzuki LT-A400F - Page 140

1D-66 Engine Mechanical:
• Apply grease to bearing, O-ring and oil seal lip.
• Install the oil seal with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
NOTE
When installing the oil seals, the stamped
mark on the oil seal faces outside.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
LT-F400/F Generator cover
CAUTION
!
The removed bearings and oil seals must be
replaced with new ones.
Special tool
(A): 09913–70210 (Bearing installer set)
• Install the bearing with the special tool.
• Install the bearings with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
(A)
I827H1140294-03
(A)
I827H1140295-03
(A)
I827H1140296-02
(A)
I827H1140312-01
(A)
I827H1140313-01