Combination Meter / Fuel Meter / Horn: 9C-2
Speedometer Removal and Installation
B827H19306002
Removal
1) Remove the indicator light lenses (1).
2) Remove the speedometer cover bolts and ignition
switch ring nut (2).
3) Disconnect the indicator light sockets (3).
4) Disconnect the speedometer cable (4).
5) Remove the speedometer (5) from the bracket by
removing the clips (6).
6) Disconnect the speedometer light socket (7) and
remove the speedometer.
7) Remove the indicator light harness by disconnecting
the coupler (8) (Black).
8) Remove the speedometer cable from the engine
side. Refer to “Generator Removal and Installation in
Section 1J (Page 1J-5)”.
1
2
I827H1930002-01
3
I827H1930003-01
6
5
4
I827H1930006-01
7
I827H1930010-01
8
I827H1930011-01
To Next Page
Loading...
