1J-6 Charging System:
12) Remove the generator cover (10).
13) Remove the gasket (11) and dowel pins.
14) Hold the generator rotor with the special tool and
remove the generator rotor nut.
Special tool
(A): 09930–44541 (Rotor holder)
15) Install the special tool (attachment) to the crankshaft
end.
Special tool
(B): 09930–31921 (Rotor remover)
16) Remove the generator rotor (12) with the special
tool.
Special tool
(C): 09930–30721 (Rotor remover)
17) Remove the key (13) and starter driven gear (14).
I827H11A0013-01
11
I827H11A0014-01
(A)
I827H11A0015-01
(B)
I827H11A0016-01
(C)
12
I827H11A0017-02
13
14
I827H11A0018-01
To Next Page
Loading...
