3B-25 Differential:
12) Remove the bearing out of the final gear case cover
with the special tool.
Special tool
(D): 09913–70210 (Bearing installer set)
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
13) Remove the oil seal out of the case with a suitable
tool.
NOTE
If there is no abnormal condition, the oil seal
removal is not necessary.
14) Remove the bearing out of the final gear case with
the special tools.
Special tool
(E): 09930–30104 (Rotor remover slide
shaft)
(F): 09941–64511 (Bearing remover)
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
15) Remove the spacer and bearing from the final drive
gear shaft with a commercially available bearing
puller or hydraulic press.
NOTE
If there is no abnormal condition, the spacer
and bearing removal is not necessary.
16) Remove the final drive gear pilot bearing with the
special tools.
Special tool
(G): 09923–73210 (Bearing remover)
(E): 09941–64511 (Bearing remover)
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
(D)
I827H1320084-01
I827H1320085-01
(F)
(E)
I827H1320086-01
I827H1320124-01
(G)
(E)
I827H1320087-01
To Next Page
Loading...
