3C-5 Transfer:
12) Remove the washer (11) and drive bevel gear (12).
13) Remove the shim (13).
14) Remove the transfer output shaft (14) with a plastic
mallet.
CAUTION
!
• Do not disassemble the transfer output
shaft.
• The transfer driven gear and transfer
output shaft is available only as an
assembly.
Installation
Install the transfer in the reverse order of removal. Pay
attention to the following points:
CAUTION
!
Apply engine oil to each gears and shafts.
• Install the transfer output shaft assembly (1) with the
plastic mallet.
• Install the shim (2), drive bevel gear (3) and washer
(4).
11
12
13
I827H1330009-01
14
I827H1330010-01
1
I827H1330011-01
3
4
2
I827H1330012-01
To Next Page
Loading...
