0C-4 Service Data:
Wattage
Unit: W
Brake + Wheel
Unit: mm (in)
Tire
Fuel + Oil
Item
Specification
P-17 Others
Headlight
HI 35 x 2 ←
LO 35 x 2 ←
Brake light/Taillight 21/5 ←
Speedometer light 1.7 ←
Reverse indicator light 3.4 ←
Neutral indicator light 3.4 ←
Engine oil temp. indicator light 3.4 ←
High beam indicator light 3.4 —
Reversing light 21 —
Item Standard Limit
Rear brake cable play 3 – 5 (0.12 – 0.20) —
Rear brake pedal free travel 20 – 30 (0.8 – 1.2) —
Brake disk thickness Front 3.3 – 3.7 (0.130 – 0.146) 3.0 (0.12)
Brake disc runout — 0.30 (0.012)
Brake drum I.D. Rear — 160.7 (6.33)
Master cylinder bore Front 14.000 – 14.043 (0.5512 – 0.5529) —
Master cylinder piston diam. Front 13.957 – 13.984 (0.5495 – 0.5506) —
Brake caliper cylinder bore Front 33.960 – 34.010 (1.3370 – 1.3390) —
Brake caliper piston diam. Front 33.878 – 33.928 (1.3338 – 1.3357) —
Brake fluid type DOT 4 —
Steering angle
Right 47° 3.0 (0.20)
Left 47° —
Turning radius 3.1 m (10.2 ft) —
Toe-in (with 75 kg, 165 lbs) 10 ± 4 (0.39 ± 0.16) 20.2 (0.80)
Camber 0.3° —
Caster 3° —
Wheel rim size
Front 12 x 6.0 AT —
Rear 12 x 7.5 AT —
Item Standard Note
Cold inflation tire pressure
Front 32.5 kPa (0.325 kgf/cm
2
, 4.7 psi) Load capacity up
to 172 kg (380
lbs)
Rear 30 kPa (0.30 kgf/cm
2
, 4.4 psi)
Tire size
Front AT25 x 8-12 , tubeless
Rear AT25 x 10-12 , tubeless
Tire tread depth
Front
— Limit: 4.0
mm(0.16 in)
Rear
— Limit: 4.0 mm
(0.16 in)
Item Specification Note
Fuel type
Use only unleaded gasoline of at least 87 pump octane (R/2
+ M/2) or 91 octane or higher rated by the research method.
Gasoline containing MTBE (Methyl Tertiary Butyl Ether),
less than 10% ethanol, or less than 5% methanol with
appropriate cosolvents and corrosion inhibitor is
permissible.
P-03, 28, 33
Gasoline used should be graded 91 octane or higher. An
unleaded gasoline type is recommended.
Others
To Next Page
Loading...
