3. PLOTTER
3-29
3.15 My Friends (Social Network)
The My Friends feature marks (with a symbol), on the Plotter and Weather displays,
the locations of the vessels registered to the My Friends function (see paragraph
3.15.1). A vessel must be equipped with Multi-Function Display, be logged into its My
TimeZero
™
accounts and have My Friends activated. Only friends within the WLAN
range are shown.
3.15.1 How to setup My Friends
1. Open the [Settings]-[General] menu.
2. Login to your My TimeZero
™
account at the [SOCIAL NETWORK] section.
3. At the [Nickname] field in the [MY FRIENDS] section, the name used to register
your My TimeZero
™
account is shown. If desired you can change the name. Tap
the keyboard, then enter a name.
4. Tap [Manage My Friends] in the [MY FRIENDS] section.
5. Tap [+ Add].
6. Enter friend’s e-mail address then tap [Send].
7. When the friend approves your invitation, The "You have xx friend" will reflect the
addition.
3.15.2 How to show or hide the My Friends display
On the Plotter display or Weather display, open the [Layers] menu, then turn [My
Friends] on or off as required.
When the My Friends display is active, the vessels that you have registered (see
paragraph 3.15.1) are marked with a symbol, as shown in the figure below. Tap the
symbol to show detailed information about the vessel.
Hello, John Smith
Suzuki
Lat N 34°26.400’
Lon E 135°07.104’
COG 179.7°
SOG 20.0 kn
Furuno
My Friends
symbol
Vessel’s data
(Name, geographical position,
COG, SOG)