0A-8 GENERAL INFORMATION
D When disconnecting vacuum hoses, attach a tag describing
the correct installation positions so that the hoses can be re-
installed correctly.
D After servicing fuel, oil, coolant, vacuum, exhaust or brake
systems, check all lines related to the system for leaks.
D For vehicles equipped with fuel injection systems, never dis-
connect the fuel line between the fuel pump and injector
without first releasing the fuel pressure, or fuel can be
sprayed out under pressure.
D When performing a work that produces a heat exceeding
80_C in the vicinity of the electrical parts, remove the heat
sensitive electrical part(s) beforehand.
D Use care not to expose connectors and electrical parts to wa-
ter which will be a cause of a trouble.
To Next Page
Loading...
Need help?
General
