ENGINE GENERAL INFORMATION AND DIAGNOSIS (TBI FOR G10) 6-31
SCAN TOOL DATA CONDITION
NORMAL CONDITION/
REFERENCE VALUES
VSS (for 4-A/ T)
(Vehicle Speed Sensor)
At stop. 0 km/ h 0 MPH
SHIFT SOL1
CON (Command Signal)
MON (Monitor Signal)
Ignition switch ON, selector lever is shifted at P,
R or N range
OFF
SHIFT SOL2
CON (Command Signal)
MON (Monitor Signal)
Ignition switch ON, selector lever is shifted at D
range and vehicle stops
ON
THROT POS LEVEL
(THROTTLE POSITION
LEVER FOR A/ T)
“0” (about idle position), “1”, “2”, “3”, “4”, “5”, “6” or “7” (about full open) appears
according to throttle valve opening.
TRANS. RANGE
(TRANSMISSION
RANGE SENSOR)
“P”, “R”, “N”, “D”, “2” or “L” appears according tho selector lever position.