Swann AMI CACE - Diagnostics (Main Menu 2)

46 A-96.250.871 / 120417
AMI CACE
Program Overview
8.2. Diagnostics (Main Menu 2)
Identification Designation AMI CACE * Menu numbers
2.1* Version V6.20-10/16
Factory Test Instrument 2.1.4.1*
2.1.4* Motherboard
Front End
Operating Time Years / Days / Hours / Minutes / Seconds 2.1.5.1*
2.1.5*
Sensors Conductivity Sensor 1 Current value 2.2.1.1.1*
2.2* 2.2.1* 2.2.1.1* Raw value
Cell constant
Sensor 2 Current value 2.2.1.1.2*
2.2.1.2* Raw value
Cell constant
Miscellaneous Case Temp. 2.2.2.1*
2.2.2*
EDI Actual current 2.2.3.1*
2.2.3* Actual voltage
Total current
Total flow
Last exchange
Sample Sample ID 2.3.1*
2.3* Sample Flow Sample Flow 2.3.2.1*
2.3.2* Raw value
Sample Temp. Temp.1 2.3.3.1*
2.3.3* (Pt1000)
Temp.2
(Pt1000)
I/O State Alarm Relay 2.4.1*
2.4* Relay 1/2 2.4.2*
Input
Signal Output 1/2
Interface Protocol 2.5.1*
2.5* Device Address
Baud Rate (only with RS485
Parity interface)